Series 700 - 1 thru 25-Ton Capacity
Series 800 - 1/2 thru 5-Ton Capacity

Lift-Tech Shaw-Box is one of the leading crane and hoist manufacturers in the world, a position maintained through a commitment to the most rigorous quality standards and continuous innovation and improvement.

Lift-Tech products set the industry standard for productivity, efficiency and durability--industry tested and performance proven for over a century.

Welded Steel Frame - one piece welded frame, fabricated from rolled steel sections, precision machined for

long life and accurate bearing and component alignment.

Lug Suspension --- permits the hoist to mounted in a permanent location. Mounting hardware is not Included.

Precision Machined Gearing for uniform tooth mesh and large contact surface. Operated in a totally enclosed, oil bath lubricated gear case. Gear trains consist of two or three reductions, using helical and/or spur gearing.

Automatic Load Brake --- Weston self-adjusting type, operates in the oil bath of the hoist gear case for smooth lowering control on the 700 and 800 series. Capable of holding the load independent of the hoist motor brake.

Hoist Motor Brake --- short stroke, 150% torque spring-set D.C. rectified disc type brake provides quiet operation and long life.

Machined Rope Drum --- large diameter, welded construction -- deep grooved and precision machined to give maximum rope life.

Dead End Rope Anchor --- used on single reeved hoists. Easily accessible and part of the one-piece welded frame, it securely anchors the rope compression thimble fitting which is swaged to the rope ends. true vertical life hoists have both ends of the steel rope dead ended to the rope drum.

Shrouded Lower Block --- protects fingers from being pinched between rope and sheaves and prevents dirt buildup. All hooks are provided with spring loaded safety latches.

Block Operated Limit Switch --- for additional protection of operator, hoist and load. Positive acting, momentarily reverses the hoisting motion if lower block drifts too high.

Heavy-Duty Controls --- designed for a clean, open layout to maximize performance and ease of maintenance. Contactors are oversized for increased life. Panels are housed in a dust resistant compartment designed for easy access and serviceability.

Hoist Motors --- high starting torque type, designed specifically for hoisting, with permanently lubricated ball bearings. Motors are totally enclosed, non-ventilated (T.E.N.V.) with class F insulation,and provided with an automatic reset, temperature actuated switch in the windings to provide over current protection.

Convenient Push-button Control --- all motions can be controlled from a convenient, easy to operate push-button control station suspended from the hoist. An external strain reliever cable extendscable life and prevents pulling the cwontrol cable from the hoist electrical connection on fourbutton and larger stations.

For more information,
Call Us Toll-Free at
(800) 777-7394 or